M3CMOS 18000 is a digital eyepiece camera with a resolution of 18 MP, the maximum in the SIGETA line. Works with any biological, repair and metallurgical microscopes. Registers radiation with a wavelength from the limit of the ultraviolet spectrum to the middle of the red range (the long-wavelength part is limited by a protective IR filter). The photosensitivity of the matrix is 0.62 V / l-s: this is a very good figure for a sensor divided into 18 million individual cells - pixels. Ultra-performance of this device is provided by a modern connection interface - USB 3.0 with data transfer speeds up to 5 GB / s. The camera is capable of capturing photos and videos at up to 32 fps, realistically reproducing colors and shadows.
The SIGETA M3CMOS 18000 digital eyepiece sensor measures 6.14 x 4.61 mm and contains square light-sensitive pixels with a side of 1.25 microns. The maximum image size is 4912 x 3684 px, the minimum (with 4x4 binning) is 1228 x 922. The shutter speed is regulated by an automatic electronic shutter, the adjustment range is 0.1 ms - 2 sec is the widest for digital CMOS glasses. A device with such parameters, in a reliable housing that protects electronics from moisture and extreme temperatures, is indispensable for documenting processes in production and laboratory microscopy.
It should be borne in mind that high-end cameras are very demanding . For example, by installing the M3CMOS 18000 18Mp on a training microscope with non-achromatic lenses, you will not fully unleash the potential of this model. However, with a professional microscope with carefully adjusted backlight, the camera will demonstrate natural colors, perfect sharpness and contrast of the image. In addition to the CD and USB cable, the kit includes a calibration slide for micrometer measurements and adapters from 23.2 to 30 mm and 30.5 mm for mounting the gamma on a wide eyepiece tube. alloy. If the rules of operation are observed, the product will be operational for a long time. up to 5GB / c
Built-in color management system Ultra-Fine Color Engine
Records stills, records video
Works with ToupView capture program
Specifications
Sensor size: 1 / 2.3 " icon-inch (6.14 x 4.61 mm)
Maximum image size: 4912x3684
Binary: 1x1, 2x2, 4x4
Shooting speed (depending on computer power):
5.5 fps 4912x3684; 18 fps at 2456x1842 resolution; 32 fps at 1228x922 resolution.
Pixel size: 1.25 x 1.25 μm <
Sensitivity: 0.62 V / bps
Dynamic range : 65.8 dB Signal to Noise Ratio: 36.3 dB Spectral range: 380-650 nm (with IR filter) Photo shutter speed: 0.1 ms - 2 s Shutter type: ERS (is electronic)
Exposure control: auto / manual
White balance: ROI and manual adjustment TempTint
Software features: adjust brightness, shutter speed, frame size
Additional information
SDK development kit compatible with Windows / Linux / OSX API Capture / Control API: Native C / C ++, C #, Directshow, Twain, Labview Power: 5V, via USB port Cooling: natural Operating temperature: -10 ℃ ~ 50 ℃
Storage temperature: -20 ℃ ~ 60 ℃
Permissible humidity during operation: 30 ~ 80%
Humidity in the storage room: 10 ~ 60%
System requirements
OS : Microsoft Windows XP / Vista / 7/8/10 (32 or 64 bit), OS X (Mac OS X), Linux
Processor: Intel Core2 2.8 GHz or higher
RAM: 2 GB or above
Free USB 3.0 (or USB 2.0) port
Monitor diagonal: 17 "or more recommended CD-ROM (optional, downloadable software from the Internet)
Camera with threaded mounting C-Mount
Optical unit FMA Ø 23.2mm
Ring adapters 23.2 / 3 0 mm and 23.2 / 30.5 mm
USB cable
Software disc
Calibration line
Instructions
Dimensions
Camera dimensions: 6.8 x 6.8 x 4.6 cm
Packaging dimensions: 15 x 15 x 10 cm
Package weight: 0.67 kg
