The TXT 4.0 controller offers many new features thanks to 512 MB of RAM and 4 GB of eMMC memory, three servo outputs and a capacitive touchscreen display that supports gestures. The enhanced WLAN and Bluetooth module offers a wireless interface for many applications. Another interface is the USB host port, to which, for example, you can connect a USB camera fischertechnik or USB drives. Up to 8 controllers can be connected to one controller in Slave mode to expand functionality. The flat body allows you to perfectly integrate the controller in the model. Firmware updates are automatically downloaded through the cloud, saving all applications on the device. ROBO Pro Coding software can be programmed both in a graphical environment and with Python!
ROBO Pro Coding is an independent operating system that can also be used with mobile devices (Android / iOS). With the optional application (Android / iOS), the TXT 4.0 controller can also be controlled by voice recognition.
Specifications:
Processor: Arm® dual Cortex®-A7 650 MHz + Cortex®-M4
Memory capacity: 512 MB DDR3 RAM, 4 GB eMMC
Expansion memory: Micro SD card slot
Color touch display: 2.4 inches, 320x240 pixels, capacitive, allows gestures
Dimensions: 90x90x17,5mm
Inputs: 8 universal inputs: digital / analog 0 -9 V DC, analog 0-5 kО, 4 inputs for fast counting: digital, frequency up to 1 kHz
Outputs: 3 servo outputs 5 V (max. 2 A), short-circuit protected, 4 motor outputs 9 B / 250 mA (max. 1 A): infinite speed, short-circuit-protected, or 8 single outputs, eg for LEDs, built-in speaker for sound reproduction, 6-pin connector: for expanding inputs and outputs, as well as the interface I²C
Wireless modules: Combined radio module Bluetooth / WLAN: Bluetooth 5.0 (BR, LE & EDR), dual-band WLAN 2.4 GHz and 5 GHz 802.11 a / b / g / n / USB 2.0 client: Mini USB connector for PC connection
Interfaces: USB-A connector, e.g. for USB-cameras fischertechnik or USB-drives
Operating system: open source on the basis of Linux, firmware updates via the cloud, USB-drive, micro SD card
Programming: Software ROBO Pro Coding (graphics and Python), compiler C / C ++ (not included) - further programming capabilities via REST interface, control is also possible using the voice recognition program (Android / iOS)
Available output voltages: 9V, 5V and 3.3V
: 9V DC power supply 3.45 mm or fischertechnik 2.5 mm port
Necessary accessories: FT-34969 battery or FT-50528 power supply.
